#VCDS PROGRAM APK#
#VCDS PROGRAM MOD#
#VCDS PROGRAM FULL#
#VCDS PROGRAM WINDOWS#

Enable fog lamp to come on for the same side as that turn signal Hidden Menu > car > carbusassignment > Interior Light > change from 9 to 1Дў8. > -> Byte 16Д«it 6 вЂ“ Interior/Ambience Lighting Adaptation active Enable interior lighting for facelift cars Hidden Menu > car > carbusassignment > Interior Light > change from 9 to 1.Дў7. вЂ“ Long Coding Helper -Byte 16 Bit 6 вЂ“ Set this bit manually to 1ДЇacelift needs an extra setting to activate the option. (3G only) Reset MMI (press setup, scroll wheel and top right button next to scroll wheel at the same time) *at this point 3G owners do step below, 3G+ go to (3G+ only) below This can only be activated through hidden menuД®nter hidden menu вЂ“ choose car вЂ“ choose carmenuoperation вЂ“ select interior light вЂ“ set to 5 to allow adjustment whist moving вЂ“ press return вЂ“ select cardevicelist вЂ“ choose interior light and press to fill box in вЂ“ press return

#VCDS PROGRAM APK#

If you choose to use the 2G hidden menu you will find the setting using the following:ДIAG SETTINGS -> APK 0x01, 0x0B, 0x0C -> Interior lighting (extended) > Channel 1 add 2 to the existing value > Long Coding Helper -> Byte 8 Bit 7 вЂ“ Interior Light Settings active вЂ“ (1 = active)Д¬ode: Enable the Interior lighting (extended) MMI item: MMI Basic (Symphony/Concert radio) вЂ“ (NON-MMI вЂ“ 2G/3G): Enable interior lighting option for pre-facelift Enable Audi Drive Select without the buttonsД®nable Euro parking lights that turn on signal at nightДў6. In MMI, Seat Adjustment you are now able to find DriverвЂ™s seat, you can set Key memory on/off.

#VCDS PROGRAM WINDOWS#

Press and hold down lock button on key fob for 5 seconds for the windows to go back up Press and hold down unlock button on key fob for 5 seconds for the windows to come down Seat memory will be there however greyed out in MMI This activates the alarm audible notification optionДЈ6: Seat Mem вЂ“ 07 Coding вЂ“ Long Coding Helper вЂ“ change Byte 2, bit 0, to 1 > Channel 63Д®nsure Module 46, Byte 1, Bit 2 is ticked. Enable DIS with Efficiency Program for MY2010+ (Not a complete Program without the Start/Stop System) > Adaption -> Channel 39, add 16 to your valueДў1. Enable Battery meter *does not appear to work on facelift cars with MMI 3G+ HDD Navigation > Long Coding Helper -> Byte 1Д«it 6 set to 1 to enable hill hold assist. Enable Automatic Hill Hold Assist вЂliteвЂ™ only works on certain abs modules вЂ“ see below link Select вЂњD on/S onвЂќ from New value drop down menuДЎ8. Select вЂњSingle Gear DisplayвЂќ from top channel drop down menu Enable Automatic Gear selection shown in DIS Enable Optical rear parking for cars without front parking sensors > Long Coding Helper -> Byte 8Д«it 0 вЂ“ Emergency Brake Flashing via Turn Lights active (1 = active)Д«it 1 вЂ“ Emergency Brake Flashing via Brake Lights active (1 = active)ДЎ6. > Long Coding Helper -> Byte 0ДЄt Channel drop down choose вЂњVolume of structure borne noise actuatorвЂќ (only choice)Д®nter a value in the proper box (0% = mute ) > Adaptation -> Set channel 2 & 3 to 250 Disable NAV & Phone warning messages while entering data at speed > Long Coding Helper -> Byte 5Д«it 3 вЂ“ Set to 0 to disable вЂњlights are onвЂќ warning when you open the door.ДЎ2. If you have already eliminated the blinking, the you will need to go to Byte 03 and undo the modification.Дisable bulb error message with LED reverse lights installed There is an LED dim instead of blink.Д«yte 02 вЂ“ Check bit 6 (Side Marker as DRL)

#VCDS PROGRAM MOD#

Instead of complete blinkВ off, there is another mod that comes as stock in Europe. > Channel 3 (Heading Wink Brightness)Дefault Value is 26, Setting value to 88 (Makes it identical to normal brightness)ДЎ0. Disable LED вЂwinkвЂ™ on turn signal вЂ“ faceliftД 9 вЂ“ Cent.

#VCDS PROGRAM FULL#

> Long Coding Helper -> Byte 3Д«it 2 вЂ“ LEDs remain at full brightness with parking lights (1 = active)Д«it 7 вЂ“ Turn off LED-strip DRLs with indicators (1 = active)Д©. Disable LED вЂwinkвЂ™ on turn signal вЂ“ pre facelift > Long Coding Helper -> Byte 10Д«it 3 вЂ“ Set to 0 to disable amber side markers (U.S. вЂ“ choose the model of choice in вЂconfiguration lineвЂ™ДҐ. It has been noted before to keep wellВ away from the вЂњBootloaderвЂќДЈ. Use this hidden menu at your own risk, you can do some serious damage to your system if you mess with the wrong settings. Note: To access the hidden menu, hold down car and setup together for 5 seconds

Vcds program